While a Hudl Focus video feed can stream directly to YouTube, there's a growing need for providing that same feed to live streaming platforms that can stream to multiple destinations at the same. This article will cover two specific ways of achieving this with BoxCast.

Live Streaming RTMP from OBS

One manner in which to live stream a Hudl Focus feed is with the additional use of Open Broadcast Software (OBS).

Step 1: Download OBS

OBS is open-source software for video recording and live streaming and free to download.

Step 2: Configure Hudl Focus

For instructions on configuring your Hudl Focus camera to connect to OBS please refer to this article.

Step 3: Set Up RTMP in OBS

Following the previous instruction, go through the How to set up RTMP in OBS section in Connect OBS to BoxCast.

Live Streaming Through the BoxCaster

Notes: BoxCast has verified this method based on a BoxCaster user contribution, so a brief summary has been included, as detailed photos and step-by-by step instruction are not yet available.

BoxCast cannot provide support for the Magewell device. If encountering an issue, BoxCast advises reaching out to Magewell support directly.

If wishing to route a Hudl Focus feed into the BoxCaster via HDMI, you will first need to connect the Focus to your network. The Hudl Focus camera connects to your network with a single ethernet cable.

Likewise, you will want to connect a device like the Magewell Pro Convert H.26x to HDMI to the same network as the Hudl Focus. This decoder is able to take the IP camera feed and output the signal via HDMI. The decoder's HDMI output can now run directly into the HDMI input of the BoxCaster.

Still having difficulties with streaming your Hudl video feed?

Please reach out to the technical support team at questions@boxcast.com and we would be happy to help!

Did this answer your question?