Before we get started, here is a quick overview of the settings you can change.

Overview:

  • BoxCaster Name
  • Allow Remote Troubleshooting: Checking this box allows a BoxCast streaming coach to connect remotely to your device and troubleshoot.

Video:

  • Video Resolution: The maximum resolution at which the video data should be encoded. By default, the BoxCaster will use the largest size available based on the resolution of the detected video input.
  • High Frame Rate: This option is only applicable to BoxCaster Pro encoders. Choose the default frame rate for streaming, or Auto-detect to let the BoxCaster choose the best frame rate. You can also override this in the advanced settings of an individual broadcast.

Audio:

  • Audio Source: The source the BoxCaster should use for audio data. You can choose a specific source in the event you are using a separate line from your video. For example, you can bring your video in via HDMI and your audio from a mixer via RCA (red/white) and simply select Analog Only so that the box will ONLY pull audio from the RCA jacks.
  • Audio Gain Control: These sliders allow you to adjust the gain levels of the analog and HDMI inputs on your BoxCaster. You can make adjustments in +/-3dBFS increments.

*Note: In order to maintain a standard scale on HDMI and analog adjustments, for the analog slider, 1V = 0 dBFS. We recommend you find a setting that works well in your workflow, then make fine-tune adjustments with the equipment upstream from your encoder.

Streaming:

  • Target Video Bitrate: The bitrate at which video data will be encoded and transmitted. By default, the BoxCaster will automatically detect your available bandwidth and make an intelligent selection. The video bitrate can be changed at any time during the broadcast if you are experiencing network issues that are affecting video quality. Note that hardcoding a video bitrate will only establish a ceiling for your video bitrates (i.e. the stream will not exceed that bitrate) but the box will still regulate bitrates up and down throughout the course of your broadcast in response to network conditions.
  • Target Audio Bitrate: The bitrate at which audio data will be encoded and transmitted. By default, the BoxCaster will automatically detect your available bandwidth and make an intelligent selection. Audio bitrates can be changed at any time during the broadcast (128k is best for Audio).
  • DSCP Value: DSCP, which stands for Differentiated Services Code Point, is a means of marking network communications in order to prioritize some types of traffic over others. By default, the BoxCaster will not use any special DSCP marking. Speak to your network administrator before changing this value. "Default" is the recommended setting.

* NOTE: It is recommended that all settings (with the exception of Audio Source if using analog audio) be left at Default. The BoxCaster will negotiate with your network and your camera to provide optimal results for your stream.

Below are the following steps you will need to follow to make these changes to your BoxCaster HDSD2 settings.

Step 1
Click on the Sources tab in the left-hand gray menu.

Step 2
Click on the BoxCaster you wish to edit.

Screen_Shot_2018-10-11_at_3.02.19_PM.png

Step 3
Edit Settings. Feel free to change the name of the BoxCaster if you have more than one on your account.

Step 4
Click the Video, Audio, and Streaming tabs to make your desired changes

Reach out to our friendly streaming coaches at questions@boxcast.com or use the chat button in the bottom-right corner of your screen.

Did this answer your question?