Encoders that support a 60fps frame rate

This article provides a list of devices and system configurations that support high frame rate (up to 60fps) streaming.

Wade Clark avatar
Written by Wade Clark
Updated over a week ago

High frame rate streaming requires a high powered device, such as the BoxCaster Pro, with increased CPU performance and higher bitrates. Attempting to stream at 60fps from an underpowered device is likely to result in a poor quality stream. This article provides a list of devices and system configurations that support high frame rate (up to 60fps) streaming.

BoxCast supports high frame rate (60fps) streaming when enabled on your account. If it is not enabled for your account, book a meeting with your customer success manager, or email us to have it added.

BoxCaster Pro + Spark

The BoxCaster Pro and Spark encoders both support streaming up to 60fps.

Broadcaster App for iOS

The Broadcaster App can stream up to 60fps on iOS devices

RTMP Products

Wirecast

  • Refer to the recommended configuration technical specs on the Wirecast site. Note that the minimum system requirements are insufficient for 60fps streaming.

  • Operating System: Windows 10, macOS High Sierra

  • Processor: i7 quad-core 2.8 GHz+

  • Memory: 16 GB+ RAM

  • Hard Drive: 500GB+ Solid State OS Drive

  • Graphics Card: NVIDIA GeForce or AMD Radeon, 1 GB+ video memory

vMix

  • Operating System: Windows 10

  • Processor: i5-7500 3.4GHz+

  • Memory: 16GB+ RAM

  • Hard Drive: 500GB+ Solid State OS Drive

  • Graphics Card: NVIDIA GeForce GTX 1050 Ti

Open Broadcaster Software (OBS)

OBS does not have recommended system requirements for a high frame rate. We would recommend that you have at least equivalent specifications to those listed above for Wirecast and vMix.

To set up high frame rate in OBS you want to navigate to Settings > Video > Common FPS Values. Select your desired high frame rate 48, 59.94 or 60 > Click Apply. See a step-by-step list of instructions for connecting OBS to BoxCast.

Teradek Vidiu

  • The Teradek Vidiu supports a maximum of 720p with 60fps

  • Make sure Frame Rate Setting is set to High

For other RTMP encoders, please confirm and test with the BoxCast support team.

For more information about upgrading your video stream to High Frame Rate support, please contact your client manager at success@boxcast.com

Did this answer your question?